CP108 Dual-Parameter Pressure & Temperature Ceramic Sensor Core (5-Pin Layout)
Integrated Thermal & Pressure Sensing | Specialized 5-Pin PCB Interface | 96% Al2O3 Thick-Film Cell | High-Volume OEM Solution
Product Overview & Dual-Sensing Architecture:
* The CP108 (CP-108 Series) is a dual-parameter piezoresistive sensing element engineered for simultaneous, real-time tracking of fluid pressure and media temperature. Built on a high-purity 96% Alumina (Al2O3) substrate, the sensor utilizes micro-thick-film screen printing to integrate both the main Wheatstone measuring bridge and dedicated temperature-resistor soldering pads directly onto the ceramic diaphragm surface.
* Equipped with a specialized 5-pin pad topology, the CP108 provides an optimized electrical interface that simplifies dual-signal conditioning for onboard microcontrollers and signal processing ASICs. Its non-isolated flush diaphragm allows direct exposure to the measured liquid or gas. Leveraging the extreme chemical inertness of 96%Al2O3, the sensor requires no protective oil-filled isolation caps or metallic diaphragms, mounting effortlessly into housing manifolds via a single elastomeric O-ring.
* Engineered with OULD’s extensive thick-film manufacturing expertise, every CP108 core is produced using premium imported conductive pastes and 100% automated laser resistor trimming. This yields ultra-fast thermal response times, negligible pressure hysteresis, and superior linearity across broad operational spans.
Key Technical Advantages for B2B OEMs:
1,Dual-Parameter Sensing in One Package: Consolidates pressure and thermal monitoring into a single ceramic core, drastically reducing transmitter footprint, BOM costs, and assembly labor.
2,Dedicated 5-Pin Electrical Layout: Purpose-built 5-pad array ensures clean pinout separation, preventing crosstalk between temperature and pressure signals.
3,Rapid Thermal Dynamics: Directly printed temperature-sensing pads eliminate structural thermal resistance, guaranteeing fast thermal equilibrium and accurate real-time feedback.
4,High Chemical & Overload Resistance: Solid 96Al2O3 ceramic matrix resists aggressive chemicals, fuels, and acids while providing exceptional burst pressure tolerance.
5,Ultra-Low Hysteresis & Superior Linearity: Laser-calibrated bridge geometry ensures precise full-scale proportional output even under high cyclical pressure surges.
6,Active Thermal Stabilization: Integrated resistor networks neutralize zero shift and span drift caused by ambient or fluid temperature fluctuations.
7,Streamlined Mechanical Integration: Elastomeric O-ring sealing enables rapid, leak-proof assembly into plastic, aluminum, or stainless steel housings.
Technical Specification Overview:
Parameter / Feature Engineering Specification
Model / Series :CP108 / CP-108 Series
Sensing Capabilities:Simultaneous Pressure + Temperature Sensing
Substrate / Diaphragm:96% Alumina Ceramic (Al2O3)
Terminal Configuration:5-Pin Solder Pad Array (Bridge + Temp Resistor)
Diaphragm Design:Concave Base / Flush Diaphragm
Resistor Calibration :Fully Automated Laser Trimming
Thermal Response Time:Rapid Transient Thermal Response
Sealing Interface:Direct Housing Radial/Axial O-Ring Gasket
Fluid Compatibility:Water, Hydraulic Oils, Refrigerants, Fuels, Compressed Air, Mild Acids/Alkalis
(Note: Full mechanical dimensions, pin connection charts, and detailed electrical specifications are available in the downloadable PDF datasheet.)
Primary Industry Applications:
1,The CP108 dual-sensing ceramic element is the ideal building block for system integrators and instrument manufacturers across:
2,Commercial HVAC & Refrigeration Systems: Simultaneous line pressure and temperature monitoring for smart heat pumps and chillers.
3,Automotive & Commercial Vehicle Electronics: Engine oil pressure/temperature modules, fuel rail management, and transmission fluid monitoring.
4,Smart Municipal Water & Utilities: Dual-parameter pressure and water temperature sensing in smart metering and distribution networks.
5,Industrial Automation & Process Equipment: Hydraulic power packs, compressor stations, and chemical fluid monitoring systems.
Why Source CP108 Cores from OULD?
* Field-Proven Thick-Film Engineering: Deep manufacturing experience ensuring batch-to-batch consistency and high operational yield.
* Precision Automated Manufacturing: 100% automated laser resistor tuning guarantees tight output tolerances and zero calibration drift.
* Scalable OEM/ODM Customization: Customizable bridge resistances, output sensitivities, and pressure ranges to match your specific ASIC requirements.
* Comprehensive Global B2B Support: Rapid sample delivery, 3D STEP files, and direct engineering assistance for seamless system integration.
Request Engineering Samples & Quotation
Enhance your dual-parameter sensing instruments with the high-reliability CP108 5-pin ceramic pressure & temperature core. Contact our technical sales team today for sample requests, customized calibration, and volume B2B pricing.
Email: [denny.gu@ould.com.cn]
[aurora.liu@ould.com.cn]
Phone / WhatsApp: [+86-13755847625]
Inquiry Form: Submit your project details below to receive a response within 24 business hours.